Choosing hygienic shower toilet: installation instead of a bidet

Hygiene plays an important role for each person. Terms and understanding of its necessity laid in early childhood. From it depends largely on longevity. However, their concept of purity for each nation. For example, in most developed countries it is almost impossible to find the bathroom, which would be absent bidet. The former Soviet Union people do not often install such products. Someone is trying to save money, not knowing the destination plumbing, someone just not enough space. Owners of small spaces should not abandon the improvement of living conditions, they can take advantage of a hygienic shower toilet. It performs all the functions of a small bath with a fountain.

Features and design a hygienic shower

Sanitary device used for hygiene procedures, visually similar to a standard shower for the bathroom. A small difference is the jet supply. It is much smaller, is not dissipated. The device has a simple structure, composed of the following components:

1. Mixer. To it is supplied hot and cold water. With the lever is adjustable jet head.
2. Flexible hose. It consists of an inner tube, the outer sheath, two nuts used to secure it to the mixer and watering.
3. Watering can. Contains a key to the water supply, even when the mixer is turned on, the jet will not run until you press on it. There are many models that differ in shape.
4. Holder. Mounted on the wall next to the toilet. On it hang a shower.
5. Thermostat. Quality expensive products are equipped with a special device that allows you to adjust the temperature.

When buying hygiene soul is not worth saving, it is better to take the model of the instrument to maintain a constant temperature. With it you can be sure that the hot water will not cause unintended burns.

Advantages and disadvantages

When choosing a product to maintain body hygiene, it is important to know its strengths. The main advantage is the compact design. It takes up little space, so is suitable for small rooms on the area. Other positive characteristics of the soul are:

• Versatility. In addition to direct use, the product allows for cleaning of the toilet, to collect water for various needs, rinse shoes, perform other tasks.
• Saving money. Due to the relatively low cost of equipment is available for the majority of citizens. Can partially or completely abandon the use of toilet paper.
• Versatility. Suitable for use by all family members. Will become an indispensable subject for pregnant women in the postpartum period, to suffering from hemorrhoids, underwent surgery on the rectum, for the elderly, who need the comfort and facilitate daily procedures.
• Easy installation. For those who can make their own layout for the water supply, set the item with your own hands is not difficult.
• Ergonomics. Effective device allowing to save time and energy when it is applied.

As with any subject, shower has some flaws, but they are not critical. By cons include:

• Subject uncomfortable when used in a small room for big and full of people.
• Not protected from children who can use it for other purposes. After their games are puddles on the floor.
• Some models, built in the toilet, connected only to hot or cold water.
• When the pressure is difficult to find the optimum temperature.

Variety of hygienic systems

The concept of hygienic shower combines different products that differ in appearance, the method of installation, design features. Depending on the type of mixer are the following models:

1. Lever. Pressure and temperature are adjusted using a simple mechanism, by changing the position of the lever.
2. Dvuhventilnye. Reliable variant which has gate system for controlling the water supply.

The following types can be distinguished by type of constructions and mounting method:

1. Wall. There are built-in and wall-mounted versions.
2. Mixer with hygienic shower.
3. Products with the thermostat.

There are options that are installed directly into the toilet:

1. Cover - bidet.
2. Toilet - a bidet.

For large areas, combined with bathroom toilet, you can install a full bidet. They are much more convenient to use, thus avoiding the puddles on the floor and the toilet lid will remain dry.

Wall mounted shower

In appearance the design is similar to a standard shower. Its installation is carried out in the vicinity of the toilet. Opt for such a product, it is recommended to give preference to models in which the mixer has no spout. By the method of installation are two main types: integrated and open, which are fixed on the wall.

Upcoming versions are less expensive. They are easier to install, they are cut into the pipe line, the holder is mounted on the wall, watering can is connected with a mixer with a hose. When carrying out repairs, to dismantle the system is very simple.

Hidden structures are more popular and in demand. Although the price of such products is higher than that of the previous analogue, but they can significantly improve the aesthetic appearance of the room. Establish the subject is difficult. For this it is necessary to dismantle the trim on the walls, Overhaul in the toilet.

In the case when installing the product are planned reconstruction activities have to be equipped with special sanitary cabinet, which will hide all the design flaws. This method is inconvenient for models without a thermostat, because constantly have to adjust the temperature.

Bidet

Bidet is a small tub with fountain. In appearance similar to a small toilet that does not have a drain tank. In addition to direct destination, it can be used for the washing of the feet and hands. It is an indispensable device for disabled people, elderly people who are not comfortable using a standard sink. By way of installation are two main types:

1. Floor. The most demanded option. Installation is similar to the toilet. They consist of a cup in which there is a mixer with a fountain. The water jet can be a conventional, pulsatile, saturated air.
2. Wall. Less common. They are attached to the wall using discreet support elements that are behind a partition with plumbing communications. This design simplifies the cleaning of the toilet, as it allows you to wash the floor beneath it.

Bidet differ according to the type of the waste outlet, which can be:

• horizontal;
• vertical;
• oblique.

The materials used in the manufacture of items, as follows:

1. Sanitary ware. The service life of 30-40 years. The structure of the material is friable, but the price is lower than that of porcelain designs.
2. Sanitary porcelain. Raw materials characterized by the absence of the porous structure, it does not absorb odors. You can use the product for 50-60 years.

By accommodation type can be identified:

• detached;
• combinations.

Toilets with bidet functions

The main feature of these structures is their functionality. There are two products are combined in one. Outwardly, they practically do not differ from the standard bowl, with the exception of an elongated bowl and a larger tank. This is a good option for any bathroom, it does not require much space.

Water for performing a bidet function is fed through special nozzles which are arranged on the nozzle under the rim of the bowl. There are options that have a mechanical sprayer built into the side of the bowl. The reservoir is electronic equipment, through which the control procedures.

Toilets, bidets, often have a lot of additional features:

• Backlight. It allows you to conveniently use the product when the light is turned off in the house.
• Thermostat. It is used for controlling water flow temperature.
• Seat heating. It increases comfort, especially important during the cold season.
• Hair dryer. To dry after rinsing.
• Function hydraulic and air massage.
• The device analyzes the biomaterial.

Seats (cover) with a bidet function

The most important feature of such products - shower. There are many models, different features and characteristics. Many seat bidet have a heating system, drying, several modes of water flow rate. The greater the variety of bells and whistles in a new cover, the higher its price.

Cover with bidet functions designed to enhance comfort. Controlled from the side of the electronic board. The sequence of actions can be programmed and carried out cleaning the procedure by pressing a single key. Completeness more upgraded models adds a special control.

The device does not require complicated installation, simply put on the conventional seat position, connect to the water. Choosing a seat is to be understood that it is not suitable for every toilet. Preliminary it is necessary to make measurements of earthenware element.

Types of mixers to a hygienic shower

Hygienic shower often mounted on the wall on either side of the toilet bowl. it can be hidden and the external type for mounting. This is a great alternative to a separate bidet. A simple device is endowed with all the necessary features to comply with hygiene does not occupy a lot of space, which is important for small bathrooms. There are several types of mixers, different design and features. The most popular are:

• Wall. Faucet spout has no water is carried out through a flexible hose. Shower and holder growths attached to the wall;
• Mounted on the sink. Option is possible if the sink is located next to the toilet;
• A built-in toilet. You can embed in any toilet lid. A mobile device can be transferred into another bowl. Control can be manually or via remote control.

Self installing hygienic shower

When the model is selected and purchased, you can proceed with the installation. Not necessarily for this invite plumbing with a simple task can handle any man. Wiring method will depend on the model chosen. If it is wall-mounted version, it is important to determine the correct place. Make it simple - you need to sit on the toilet and give a hand to the wall. At the most convenient height makes mounting for a small watering can. Before you begin, you should consider several important points.

installation height

Mixer and watering can holder can be mounted on a wall or on different ones. The main challenge affecting the comfort in use - to select a suitable height. There are no specific standards, installation is carried out on the basis of personal preferences.

The product will look aesthetically pleasing, if the mixer hose in the free state will not touch the floor, so it is not necessary to establish the design elements is too low. When the tile cladding is necessary to choose a place at the junction, without decoration and drawings.

Choosing the height of the mixer, it is necessary to take into account age, state of health of the household. If someone from the family, there are signs of diseases that limit movement, it is possible to sacrifice the aesthetics and to arrange a shower from the floor, in a prominent place.

Wall mounting

Wall products should choose an outdoor installation type. The mixer is fixed to the surface of the wall through which water will be eyeliner. Nearby at a comfortable height set holder for watering.

Now you can proceed to the installation of flexible hoses. Between all the elements of prefabricated structures must be placed rubber pads. This will help prevent leakage. If the seal is not complete, they must be purchased separately.

It can also be mounted to the shower wall, hidden way. Option involves organizing niche, creating boxes. The water supply tube provided specifically laid, which also secrete a niche. On the surface, there is only a platform with a lever holder, watering can. Way more aesthetically pleasing, but it is not suitable for all rooms. The possibility of installation affects the thickness of the walls, the location of the ventilation shaft.

Installing the soul to sink

Installation is possible with a special model with its own challenge and an additional tap hole. This is a great option for a combined bathroom, where the sink is located next to the toilet. The process of installing the device for intimate procedures has been very simple. Length of hose watering should be enough to use the shower without tension in the toilet.

For more comfort, use a mixer need to buy a thermostat. This will not be distracted during the hygiene procedures for permanent regulation of the water temperature. The device will allow to stand the temperature and keep it automatically.

Installation of bidet toilet seat cover on a regular

Installation of a new multi-function lid complexity is similar to the simple replacement of the standard seats. Unscrew the plastic nuts at the bottom of the toilet, remove the old product and put a new seat-bidet, fixing well.

Now connect water. Overrides its supply to the tank, remove the hose and fasten thereto tee joints thoroughly internal special wrapping tape or tow. The upper portion of the tee fasten the hose from the tank, inserted into the lower pipe of the water supply.

To connect to the power outlet is required. Place it is possible to provide for the repair or electrically conduct in the open way for the cable channel. E check operation panel, we provide the water. Just a few minutes a simple toilet will become a modern device.

Top manufacturers of sanitary systems for toilets

Hygienic system for toilets on the market in a huge range, with a set of very different functions. There are low cost, luxury, medium-sized model. Select the appropriate device is not easy. To begin to understand the configuration, evaluate manufacturing material, the basic properties and characteristics of the mixers. According to customer feedback, the most practical, easy-to-install model produces the following manufacturers:

• Grohe. The German company gives their products the longest warranty (10 years). Elements of shower systems are made comfortable to use, the correct form, no sharp edges, the relief. Nothing extra - only the quality and simplicity;
• Hansgroh. The same company from Germany. Most manufactured systems targeted at small rooms;
• Jacob Delafon. French master designer create only the highest quality system. The company confirms the longevity of the product long-term warranty (5 years);
• Oras. System for toilets from the Finnish manufacturer require careful treatment, less durable than previous versions. The company no longer focuses on the introduction of various technological innovations;
• Roca. Spanish products have attractive appearance, easy to use. The price for the goods of this manufacturer is high, due to the quality, long service life of all parts of the sanitary toilet system;
• Vidima. Produced showers models have a traditional look, without too much glitz and frills. Production facilities are located in Bulgaria, the products are characterized by a pleasant price.

conclusion

Established hygienic shower in the bathroom should not only in harmony with the overall interior room, but also meet the standards related to the location, the installation process. Connecting any configuration model is successful, if strictly follow the instructions and listen to the advice of experts. To work with your hands need a minimum set of tools and a couple of hours time.