Some tools can be used for other purposes and benefit. For example, as a substitute to shaving, you can use hair conditioner. This is a very good alternative. However, with most shaving foam and 7 stunning life hacking it can make a lot of useful things. As an option, it is a fairly good job of removing makeup, t. To., It contains a lot of cleaning components.
Content
- Useful life hacking
- Use as solvent
- Greasing of loops and polishing
- Create ink and paper
Useful life hacking
To create snowballs need potato starch, food container and means for shaving. Everything is mixed until homogenous. Will only dazzle snowballs. From the same weight can be obtained for sculpting clay, but it is further added a little sunflower oil.
Use as solvent
If suddenly housewives did not have at hand stain remover, then it successfully replace the shaving foam. It is very effective against fresh spots on clothing. After applying the stain, the treated area is wiped with a damp cloth. Likewise removes stains from the carpet, but after drying the cleaned area should be vacuumed.
It works and with dirty hands. You need a good rub your hands and rinse with warm water. Foam washes acrylic, technical oil and some other substances.
Due to the fact that the shaving manufacturers add a variety of flavors, and they can serve as a means for repelling mosquitoes.
Greasing of loops and polishing
If ever annoying creaking door, then come to the aid may also regular foam. It is applied to the door hinges. She can also be clean limescale deposits with crane. Generally, it copes with a polished stainless steel surfaces and gives them shine. The layer of shaving foam and dry sponge returns presentation both old pots and refrigerator.
After taking a shower constantly misted mirror. To avoid this, you can put on it the foam (it is also suitable for the glass in the car). It is necessary to squeeze out a small amount to the glass and carefully rub the cotton cloth. It creates a water-repellent thin film on the surface of the glass and the water drops do not settle on it.
This trick works with door and shower cabins, windows, electric stove and other glass objects.
Create ink and paper
Foam can be prepared in an unusual paint to create volumetric paintings. For its manufacturing need the following:
- PVA glue;
- shaving foam;
- any colorings;
- disposable cups.
The glass is added to the glue stains and everything is thoroughly mixed. After that add a shaving gel. Such a foam can paint brushes, wands and via Kul'kov (typed in a plastic bag). The result is a rather bulky images that retain their shape after drying.
Foam can also be made Lizunov. In addition it will need PVA glue K. To Lizun was colored, the dye is added into it, but if this is not at hand, you can add a watercolor painting. All mixed thoroughly until a thick mass.
You can make an unusual design paper with your hands. For it will need:
- shaving foam;
- gel food dyes;
- construction paper;
- line;
- glass container;
- paper napkins;
- masking tape or duct tape.
To begin, the paper must be glued on the edges with tape so as not to stain her back side. It is better to use electrical tape instead of Scotch, t. To. The latter will ruin the paper. Then the foam into a container and added a small amount of dye. Everything is mixed wooden spatula. After this paper falls into the resulting mass (it is only necessary to get wet). The paper laid out on a napkin unfolded and the excess is removed using a ruler. Thus, the paper is obtained an unusual pattern.