How do I clean a washing machine filter?

Probably everyone knows that for the normal operation of an automatic washing machine, it is necessary to periodically clean its hydrofilter. But what is this mysterious filter and where exactly it is located, is not known to everyone. Some believe that he is at the drain hose, others - on the contrary, intend to look for him in the place of water supply( to purify the water that is fed into the machine).Both are wrong, both. It turns out that the hydrofilters in the eraser are two. One - is designed to drain the waste water, the other - to purify the water coming into the unit. Consider how to clean the filter of the washing machine in more detail.

to the contents ↑

How to clean the drain filter

This part is located at the bottom of the appliance, below the plastic panel. The panel is held on special latches. To clean the hydrofilter of dirt, you need to remove it first, using the following tips:

• In appearance, the filter is similar to a cork.
• Unscrew it uncomplicated. It is enough to turn it counter-clockwise. Turn until the "plug" is completely wrung out.
• If the part is fastened with a special bolt, it must first be unscrewed using a screwdriver.

Important! After you have dismantled the hydrofilter and water leaked out, you need to carefully clean the hole from the debris. After this you must wash the part itself with running water.

Sometimes it happens that the filter is so heavily clogged with dirt that it "sticks" tight, and you can not remove it in this way. How to act in this situation? The algorithm for cleaning the LG washing machine filter in this case is as follows:

1. Place the washer on its side.
2. Unscrew the pump.
3. Unscrew the filter from the inside.

Important! It is not so difficult to clean the drain hydrofilter from contamination. But this is only if you do this regularly. You can also extract through the drain filter various small items that remained after washing.

to the contents ↑

How do I clean the fill filter?

The hydraulic filler is not available on all models of washing machines. It is designed for rough cleaning of incoming water from mechanical impurities and rust. It is a small grid. It is periodically clogged with dirt and must be cleaned.

The algorithm for cleaning the filter of the Indesit washing machine is as follows:

1. The filler filter is located next to the water supply valve. Before starting cleaning, it is necessary to turn off the water.
2. Unscrew the water inlet hose.
3. Using the combination pliers, remove the filter grid.
4. Clean the filler filter with an old toothbrush, under the strong pressure of water.

Important! If there is a pre-filter in the stylalk, the grid will not get dirty very soon.

to the contents ↑

How to clean filters in a Samsung machine?

If the error messages 4E and 5E are displayed on the device, these signals are used to clear the hydrofilter.

Important! To clean the hydrofilters, you should not use detergents containing abrasive ingredients, as well as brushes made of metal.

The procedure for cleaning the Samsung washing machine filter is as follows:

1. Close the water.
2. Unhook the hose from the nozzle located at the rear of the unit.
3. Using pliers, remove the mesh, rinse under running water.
4. Thoroughly clean the nipple from the inside and outside.
5. Put the mesh back, and then connect the hose.

Important! It is recommended to perform the cleaning procedure every year, regardless of the appearance of the corresponding code on the display.

For cleaning the mud collector, the order is as follows:

1. Remove the cover from the front and bottom of the machine.
2. Remove the plug, designed for emergency drainage of water, drain the water.
3. Remove the cover from the water filter, and clean it from dirt.
4. Install the accessories in place, close the cover at the base of the machine.

to the contents ↑

How to get rid of contamination of the drain pump?

If the water is stagnant after washing, then this is one of the signs of a clogging of the drain pump. Like the hydrofilter, the pump is clogged with tissue fibers and villi. Rinse the pump yourself - the task is not easy, it is advisable to consult a specialist.

Budget models are not equipped with garbage collectors. Often you have to dismantle the panel to assess the condition of the nozzles, hose and the hydraulic pump itself. If you absolutely want to cope with this task on your own, consider the algorithm for releasing the drain pump from contamination with the example of the Indesit washing unit:

1. Remove the protective panel at the bottom of the washer.
2. Move the unit away from the wall. Slightly tilting the machine, drain the rest of the water( of course, this will require a pallet or a basin).
3. Remove the pump casing( cochlea) by unscrewing the 2 bolts on which it is fastened.
4. Disassemble the hydraulic pump and rinse it thoroughly.
5. To clean the trap, remove the nozzle that drains the water from the tank to the drain water filter.
6. In the reverse order, replace the accessories and tighten the dirt trap.

to the contents ↑

How do I clean the drain hose?

The simplest and most effective method is the use of citric acid. To do this, run a long cycle of washing at a temperature of 60 degrees. Is on sale and special means for cleaning impure. If this does not work, you will have to detach the hose and rinse it well with hot water.

If you clean the filters of the Bosch washing machine or any other brand in a timely manner, it will last you longer. How to do it, you now know.