Overview of the 6 best screwdrivers Interskol: characteristics, pros and cons

Screwdriver - electric hand tools with torque adjustment. Designed for tightening and unscrewing by means of fasteners nozzles (screws, screws, dowels). The models are divided into storage and networking.

Cordless. They operate from an independent power source - battery.

network . Power supply - external stationary grid or gasoline generator.

Types of batteries:

• nickel-cadmium;
• hybrid (nickel-metal);
• Lithium-ion.

Types of tools:

• screwdriver on a battery pack;
• powered screwdriver from the power supply;
• Cordless lithium;
• Professional screwdriver;
• Screwdriver with a flashlight;
• screwdriver (drill) stroke.

Interskol DA-10 / 14,4M3 - battery

A distinctive feature of the cordless screwdriver - the presence of the battery. Ability to work without being connected to the power supply greatly facilitates the implementation of operations in the remote areas:

• small floor space;
• high-altitude work;
• assembly-disassembly of furniture.

Selecting the type of battery due to:

• financial capabilities;
• temperature regimes;
• frequency of use of the tool.

When choosing a screwdriver:

• capable of operating at sub-zero temperatures;
• with long battery life (the presence replaceable battery);
• mechanical properties over a wide range;
• low price

It preferred to stay on the model Interskol DA-10 / 14,4M3.

Pros:

• the presence of a nickel-cadmium battery allows working at subzero temperatures, a sharp drop at which the change of job site (street-space) requires compliance thermal regime;
• presence of the second operating tool increases battery time;
• high torque developed by the engine of the new development;
• cartridge reliability allows you to work with a variety of metal products;
• possibility of working with any base (board, laminated particle board) into which is screwed a screw or screw.

Minuses:

• soft design;
• properties batteries lose charge if the product has not developed all the resources.

Characteristics:

Equipment:

• Power Supply - 2 pcs;
• a locking device - 1 unit;
• charging unit - 1 pc;
• for storage and transport case;
• Supporting documentation: instruction manual, warranty.

To acquire full strength tool (bits Crosspoint, spline, hexagon and others) in a single amount or in sets. It depends on the operations that are to be purchased to make the tool.

Interskol LH-10 / 320E2 - AC

Such screwing work from the mains, which significantly reduces the weight of the tool. It does not require battery monitoring and charging. conservation Working time is not limited.

When choosing a model, guided solely by the features of the unit mechanical properties.

If you have access to electricity it makes sense to choose a screwdriver DS-10 / 320E2. Value for money and functional features makes this tool indispensable both in domestic and industrial environments.

Pros:

• stepless electronic speed adjustment;
• No loss of spindle rotation when changing turning speed that optimizes drilling and screwing fasteners;
• metal used for manufacturing the gear unit;
• low price;
• light weight;
• ergonomics.

Minuses:

• the cord limits the range of operation in the room, so they often require extension;
• increased noise at high speeds.

Characteristics:

Equipment:

• Safety and operating instructions - 1 pc;
• guarantee;
• box.

Necessary to purchase the piece or in a set of bits for different purposes.

Interskol SHA-6 / 10,8M3 - lithium

Lithium screwdriver - a tool with a rechargeable lithium-ion batteries, the presence of which provides its own pros and cons.

The greatest number of positive reviews earned model Interskol SHA-6 / 10,8M3. This design is great for everyday use or a series of workshop.

Pros:

• large battery capacity;
• no need to discharge the battery before recharging;
• no self-discharge;
• the presence of a removable battery;
• low weight;
• low price;
• the presence of illumination;
• 18 levels of torque.

Minuses:

• specificity of a lithium-ion battery, which limits the use of this tool at low temperatures;
• required for the size of the drill shank adapter other than 1/4.

Characteristics:

Equipment:

• Power Supply - 2 pcs;
• semiconductor Charger - 1 pc;
• document security and use of the product;
• Case for storage and transportation;
• guarantee.

Accessories:
It is recommended to purchase a set of bits for various purposes with the size of 1/4 of the shank.

Interskol DA-10 / 12m3 - professional

Screwdriver, classified as a professional tool should have the functions and consumer qualities:

• increased operating time;
• usability (ease of use, low weight);
• the mechanical strength of the hull and parts of the mechanism;
• possibility of working at low temperature conditions;
• high degree of torque, increased range of rotational speeds.

Among the other models by a combination of price, quality, packaging can be considered the acquisition of products Interskol DA-10 / 12m3. This product is equipped with a rechargeable battery.

Apart from the functions screwdriver serves as a drill.

Pros:

• stores operating functions at low temperatures, is not afraid of sharp temperature drop by equipping a nickel-cadmium battery;
• presence replaceable battery allows to keep the tool performance during the working day;
• longer life of the components stop due to the application of double rolling bearings (instead of the sleeve) on the primary shaft of the tool;
• highest torque - 32nm;
• low price compared to the models of other brands with similar functions;
• working area illumination enables operation in poorly lit areas;
• drilling performance in terms of steel up to 10 mm, timber - 20 mm.

Minuses:

• Nickel-cadmium batteries require fully discharged before charging the next, during long storage self-discharge;
• weight and ergonomics of the screwdriver, which is very controversial because of the subjectivity of the evaluation of these qualities.

Characteristics:

Equipment:

• Power Supply - 2 pcs;
• locking chuck - 1 pc;
• charging electrical appliance - 1 pc;
• Case for storage and transportation;
• instructions for use and safety;
• guarantee.

Accessories:
When choosing accessories must be taken into account that this model applies to professional tools. Sets bits and drills must also satisfy the higher demands on the strength properties and wide range of use.

Interskol DA-12ER-02 - with a lantern

Equipment screwdriver working area illumination allows to perform work in the dark or under low light, its absence.

The most appropriate use of LED-lamp in battery models, which is most often used in the absence of power. One such model is the drill Interskol DA-12ER-02.

Pros:

• combination of price and quality;
• the presence of two accumulators;
• built-in battery indicator;
• lighting;
• threaded chuck;
• Torque is 18 degrees;
• metal gears;
• light weight.

Minuses:

• Li-ion batteries work is limited to the requirements of the positive temperature;
• absence holder body to spare bit;
• Product design is simple-minded.

Characteristics:

Equipment:

• Lithium-ion power supply - 2 pcs;
• charging unit - 1 pc;
• locking chuck (fastened on the tool) - 1 pc;
• magnetized magnifier length - 1 pc;
• bits: Slot - PZ1 (2), cross - PH1 (2,5,6);
• 1.5-6 drill (6 pieces);
• Case for storage and transportation;
• supporting documents: Safety and operating manual, and warranty.

Accessories:
The presence in the complete set of drills and bits allows the initial stage of work is not to make additional purchases. In the case of professional use of tools is necessary to purchase a wide range of attachments.

Interskol DU-16 / 1000ER - percussion

When choosing a hammer drill Interskol with a wide range of functions, including a screwdriver, must be considered:

• weight of the product;
• the presence of the reverse;
• possibility to select the number of revolutions;
• presence backlight.

The choice of consumers for the positive properties indicates hammer drill Interskol DU-16 / 1000ER.

Pros:

• high power;
• It serves as a screwdriver;
• a wide range of operations: drilling (concrete, brick, metal, wood, ceramics), kneading building mixtures, screwing fastener;
• reducer of metal;
• two speeds;
• qualitative lights;
• presence drilling depth limiter;
• price quality;
• combining in one unit a large number of functions.

Minuses:

• a short power cord;
• a lot of weight;
• the need to control the gearbox lubrication;
• no torque limit rotation;
• the absence of the keyless chuck.

Characteristics :

Equipment:

• handle (optional) -1 unit;
• -1 depth retainer pieces;
• Cartridge (supplied with the instrument) - 1 pc;
• supporting documents: application guide and warranty card;
• service registry obsluzhivaniya- 1 pc;
• packaging cardboard box - 1 pc.

Accessories:
A wide range of work performed by the shock drillRequires the acquisition of a set of different drills, tips, mixers to dry mixtures and paints.