It is difficult to imagine a person who at least once did not skate as a child on a swing. Even as adults, many still like to relax and swing in the garden in the country, not to mention the children. Many people set up at the construction site on the bought in the store, and create some masterpieces of their own chalet. Editorial HouseChief.ru offers you an overview of which you will learn how to create quite a popular attraction - garden swing with your hands: photos and drawings will be a good help in that.
Read article
- 1 Kinds of garden swing with photos of models
- 1.1 Swing for adults
- 1.2 Attractions for children
- 1.3 Designs for the whole family
- 2 The design of swing for the garden and the materials used
- 2.1 The support structure
- 2.2 Comfort seat for swings
- 2.3 Attaching the suspension to the support structure
- 2.3.1 Seat swings on chains and ropes
- 2.3.2 Rigid hangers made of metal and wood
- 3 How to make a swing "nest" with his own hands
- 3.1 Driving and step by step instructions for creating your own hands outdoor swing for the garden
- 4 As the country with their own hands to make a metal swing
- 4.1 Drawings Garden swings of metal, made with his own hands
- 5 How to make your own hands swing of shaped tube
- 5.1 The drawings for the manufacture of suburban swing their own hands
- 5.2 Detailed instructions for manufacturing
- 6 As of wood with their hands to make a swing
- 6.1 Doing their own hands garden swing from a tree: drawings and step by step guide
- 7 How to assemble a garden swing from scrap materials
- 7.1 Putting his arms swing from tires
- 7.2 Garden swings from logs
- 8 Gallery options garden swing
- 9 A few words in conclusion
Kinds of garden swing with photos of models
Swings are separated by material of manufacture, the type of design and purpose. For example, there are designs for adults, children and families. Consider some of the features of different designs depending on their destination.
Swing for adults
Swing for adults are characterized by simplicity and increased structural strength. They can be fixed or portable. Swing for the garden are made from different materials and must withstand a load of 120 kg. Design may have very different shapes.
Garden swing
Attractions for children
TO teeter imposes very strict requirements in terms of security. At their creation must take into account not only the design dimensions, but also environmentally friendly materials used in the production. Children's attraction must not have sharp edges and is equipped with seat belts. Also, great attention is paid to the design and construction. Swings are performed both in its traditional form, or as a missile, cars, trains.
teeter for questioning street
Designs for the whole family
Attractions are designed for the whole family, is a great design with a wide stable bench, Which can accommodate several adults simultaneously. For more comfort, equipped with swings wide awning that protects from the sun and rain. Designs have a variety of sizes, made of different materials and can be both fixed and mobile.
The design of swing for the garden and the materials used
Swings can be A-, P- and L-shaped structure supports. Also, they are suspended on chains, ropes and familiar to all from childhood balancers. Depending on the type of swings in the manufacture of attractions for adults and children are used metal pipes and corners, wooden beam and logs, plastic and materials at hand.
The support structure
swing supports are made of wood or metal. Wooden buildings aesthetically pleasing metal, but have some limitations on the weight of the person kata. Swings of the metal pipe or brackets have a relatively small weight, have a long service life, and are usually hand-held. Metal gives designers more options when creating designs for the holiday in the country. For Swings for support, you can use a thick branch of a tree, metal or wooden joists roof verandas.
Comfort seat for swings
In can be used as a conventional seat to swing board (Easiest option), old tires, chair or bench with back sofas. Design, designed for children should be provided with special safety belts.
Hanging chairs
Attaching the suspension to the support structure
Fastening the seat to the support can be rigid and flexible. The first embodiment uses a wooden beam, the metal bath or pipe. To apply flexible suspension ropes, chains and ropes.
Seat swings on chains and ropes
The flexible suspension allows you to build a swing of the materials at hand and very quickly to fix them. The easiest option - the board and two rope length, which are attached to a thick tree branch on the site, or a beam in the roof structure verandas. By means of chains, ropes and cables may be attached to the seat as a stationary or a mobile supporting structure. It is not recommended to use a flexible suspension for driving small children, because such construction is not stable and may be unsafe twist ropes, chains or ropes. For the arrangement of the swing is better to use a chain or metal wires, since hemp ropes can stretch and sag that affect the reliability of the design.
Rigid hangers made of metal and wood
Uses for suspension down to the supporting structure of wooden boards, metal parts or tubes it has its advantages. This variant is more reliable and allows you to withstand more weight. Hard suspension is best suited for children's swing.
How to make a swing "nest" with his own hands
"Nest" comprises a suspended structure with a round braided seat. This model is swing more is called "basket" or "cobweb". Swing "nest" can fit 2-3 children or one adult. However, for the suspension of this attraction is necessary to use strong ropes.
The following materials are needed for the creation of such an attraction:
- a climbing safety rope, hemp or synthetic cord with Ø 5-6 mm back to the device;
- durable fabric seat and felt for outdoor decoration;
- steel conduit for the device support structure;
- Gymnastic hoop Ø 900 mm for manufacturing seat frame.
Playgarden Swings "Nest"
Driving and step by step instructions for creating your own hands outdoor swing for the garden
Creating swing "nest" type begins with the manufacture of wicker seats or textile. If the attraction is only for children, it will be necessary gymnastic hoops. Construction for adults are made from steel pipe with Ø 16 mm and a length of 1 500 mm, which is shaped into a circle on the pipe-bending device. The junction is welded. To frame attached cables and braided hoop in the technique of "Dreamcatcher" or macramé. Cords stretched tight seat, to avoid sagging. Wrap, foam and finished with textile or tarpaulin.
Recommendation! Seat "nest" can be supplemented with nylon bag cover and quality filling. This will make the design more comfortable.
When the seat is ready, you can begin to create a support structure. You can use the profiled pipe or thick wooden beam. It made support for the suspension seats as follows.
- Putting two side A-shaped structure.
- If stationary swing, the sidewall digged in the earth. Distance between supports should be equal to a height of the structure.
- The sidewalls are joined at the top of the steel pipe, which will be attached to the seat.
- Ropes, cables or chains are attached to the suspension bar. To prevent abrasion of cables from contact with the pipe which is enclosed by the gasket of the polyester.
- The seat is attached to ropes, cables or chains with four carabiners.
Once the design is ready, it is required to test the strength. To do this, you must put on the seat load weighing about 120-150 kg. This allows you to check the tension of the ropes, braid wrap and adjust the optimal distance between the seat and the ground.
As the country with their own hands to make a metal swing
Metal swing for the garden are fixed, with a rigid structure, and collapsible. The first option is preferable, since it provides greater stability, safety and reliability. However, it requires the availability of work with welding skills. Collapsible structure less reliable as the loosening of connecting points can occur during operation.
Drawings Garden swings of metal, made with his own hands
Let us give one of the solutions to device garden swing.
We offer watch a video - both with their own hands to make a metal swing.
How to make your own hands swing of shaped tube
Profiled tube - the best option for the production of metal swings, particularly collapsible portable designs. This is due to the fact that it is possible to do without welds in this case. Swings can be easily assembled with the help of bolts and nuts. As we have said, the bolted connection less reliable than welded because of loosening during the operation, but this problem can be solved by regularly checking the site of attachment, and, if necessary, removing the resulting play.
Consider the case of creating a metal to give a swing of profiled pipes by welding.
The drawings for the manufacture of suburban swing their own hands
Detailed instructions for manufacturing
For the manufacture of metal swing of shaped tube will need the following materials and tools:
- welding machine;
- electric drill;
- square and roulette;
- "Bulgarian";
- brush on metal;
- paint brush or roller;
- profiled tube 40 × 40 × 2000 mm - 5 pcs .;
- pipe 20 × 20 × 1000 mm - 2 pcs .;
- profile 20 × 40 × 1000 mm - 3 units .;
- board 20 × 90 × 1500 mm - 7 pcs.
| Illustration | Description of the action |
 | To begin take two pipes and cut off the ends using a grinder at 45 °. Check the angles: inner - 45 °, and the outside U-turn - 90 ° |
 | Take a length of pipe to the cross member, measured from the bottom edge of 700 mm and mark up the corners. Cut away the excess grinder with cutting wheel. By welding connect together all the details of the A-shaped sidewall. The distance between the lower ends of the lateral strut to be the order of 1 600 mm |
 | Likewise we produce a second sidewall swings |
 | Install sidewall, and they put the upper cross member, which is fastened seat swing. Check the angles between the uprights and crosspiece they should be exactly 90 ° |
 | Further strengthening structure two segments shaped tube that connects the sidewall. To the headrail need to weld the two "ears" for attachment seat suspensions |
 | Now we proceed to the manufacture of the seat swings. To do this, take a three segment profile with a section of pipe 20 × 40 mm and grab them together by welding. To withdraw from the 100 mm edge and put the first mark. Next cause risks at a distance of 120 mm from each other |
 | At elevations using a grinder to make a V-shaped cuts. The most extreme cuts should be done on the reverse side. Once all the tubes are cut, it is necessary to bend the structure of the desired shape |
 | All connection points in each tube is necessary to boil and cut off the excess |
 | Disconnect tube, boil and clean all the seams using grinders and color |
 | Fasten the pipe to the sliced boards. To do this, drill holes in them Ø 4mm. Boards fix with screws |
 | It turns out that's a seat |
 | To the top of the back to the side pipes attach "ears" for suspensions of |
 | The edge of the seat tube is drilled and set screws for fixing to the circuit |
 | Attach the chain to the seat suspension |
 | Settee hang on the upper crossbar by means of karabiners |
As of wood with their hands to make a swing
Make a wooden swing for the garden with his hands - the best option, because it does not need to deal with welding: not everyone has a special deviceAnd not every person is able to use it. With the tree is completely different situation. Wooden swing can make almost anyone who knows how to deal with hacksaw and hammer.
Doing their own hands garden swing from a tree: drawings and step by step guide
To begin study scheme. As can be seen, there is nothing complicated there.
For the manufacture of his arms swing from a bar, you can use suggested above drawing, available on the Internet is another option, or develop your own design. For a better understanding, you can use the following videos: in the process of creating them swing from the tree described in detail.
How to assemble a garden swing from scrap materials
To create a see-saw at the cottage you can use almost any improvised material. To build this popular attraction uses old tires, snags, logs, boards from freight pallets. For the most simple design is thick enough branches on a high tree in the garden, chains or ropes and seat board.
Putting his arms swing from tires
To do to give the street Swings enough hangers chains, car tires and several eyebolts. For manufacturing a tire structure 2-3 is drilled a hole into which the eye bolts for fastening the hangers. The whole structure is mounted on any bar - and are ready to swing. Similar attraction is able to withstand both child and adult weighing up to 120 kg.
Garden swings from logs
Original look garden swing of logs and snags. This is a great option, as the material for the structure can be easily found in the nearby woods. You can give free rein to your imagination and make a fabulous swing that will appeal not only to children but also adults. But there is an important point: if the installation of the stationary structure is assumed with a deep in the earth, It recommended that the lower ends of poles treated with resin or impregnated to prevent decay wood. For the manufacture of their own hands a wooden swing to give the drawings can be easily found on the Internet, or make them yourself.
Gallery options garden swing
1 of 9
A few words in conclusion
We literally to pieces to understand what suburban swing, what types there are and how they can make their own hands. We hope that our article will be useful to you when you decide to make a similar attraction at the garden area. Please send us your comments, suggestions and comments, which you can leave in a special form.
