Table of epoxy resin: how to make your own hands

If you want to become the owner of a unique and very beautiful furniture, pay attention to the table of the epoxy resin. Such products have undeniable advantages, may have diverse design and form. We offer more closely acquainted with the existing varieties, the selection procedure of the finished product and manufacturing consistency with his own hands.

Table epoxy resin: advantages and disadvantages

Opting for the table of epoxy is due to their advantages. Such products are:

The disadvantage is the high price. Buy a table of epoxy resin for a small sum it is not possible. Formation of each product is carried out using a large amount of tar, which contributes to an increase in cost. It is also worth noting the high demands on the compliance of manufacturing technology. A slight deviation can cause the appearance of air bubbles.

Structural and decorative characteristics of different types of tables of an epoxy resin

These products are presented in a large assortment. Tables can have a different design and design concept. We offer to meet with the existing species and their features to make it easier to navigate the options available.

Table tops of the epoxy resin without support surface

Such products consist entirely of resin. In the process of manufacturing the composition not poured onto the support surface, and directly into the mold to form a monolithic section.

Table tops of the epoxy resin, wood and other support elements

During the manufacture of products of this type of casting composition is carried out on the base, which can be used as old table, a piece timber, Particleboard and other materials. quite popular countertopsFormed from wood and epoxy resin. We offer to meet with possible variants.

A wooden table with decorative filling and epoxy resin

Beautiful pattern of natural wood, underlined the epoxy resin itself looks quite nice. Especially in the presence of various surface damages and voids which are filled in the manufacturing process composition. If you add a decorative filling, you can become the owner of exclusive furniture. The décor elements you can use coins, cones, acorns, pebbles, beautiful branches, photos and other items. Offer see photo tables of wood and epoxy resin, which is used when placing decorative items, and you can use as an idea for a future incarnation.

Table of slab and epoxy resins: Examples of performance features and

Slab formed by longitudinal cutting of trees. The result is a layer of wood with a unique pattern and form. In the production process table slab of the individual elements are joined together by epoxy resin or worktop is made in such a way that the timber was placed in the middle. Offer see photos of interesting solutions:

Table River epoxy resin: features

The name of these products have obtained thanks to the distinctive design. Table river epoxy resin has an insert on the center table tops, whose appearance resembles a river flowing through the flume. Most of these products are made from an array. Insert performing blue or green with jagged edges.

We suggest you watch the video, which will help to understand how to make a countertop made of epoxy resin with their hands:

How to choose a product, if it is decided to buy a table made of wood and epoxy resin: actual tips

If you decide to buy table of wood and epoxy resin, it is necessary to immediately determine its size and configuration. Optionally purchase a product of regular geometric shape: asymmetric manufacturers offer interesting options. When choosing, be sure to take into account the stylistic design of the room.

What to do if you decide to make a table of the epoxy resin alone: ​​detailed instructions

If the value of the finished product seems to you high enough, try to make yourself exclusive furniture. It is sufficient to understand the nuances and technological features of the process. We offer to learn how to make a table of the epoxy resin with their own hands without involving the master.

How to make the support structure for the table top: highlights

The frame can be made of metal or wood. When working with your hands quite popular wooden tables with an epoxy resin, as in this case, the connection of the individual elements is not necessary to use welding machine. The shape and size of the support structure are selected based on the size and shape of worktops future.

Attention! If the table is not supporting surface, you can skip this paragraph.

How to prepare a form to fill: a sequence of actions

Basis countertop can consist of separate elements go represent whole web. In the latter case, the filling composition will be made exclusively at the corners and having an opening to form a distinctive pattern. Works are carried out in the following sequence:

Illustration	Description of the action
	Depending on the selected embodiment formed shape for pouring. The edges of the inner surface of the cover forms a dense film to solidified composition from the well behind the base form.
	Set the prepared formwork on the ground. Put into decorative elements. Degreasing the contour of all joints for leaks which should ensure that before the start of casting.
	The sizing adhesive gun all mating surfaces by carefully controlling the quality of the formed compound. For this purpose, you should use silicone sealant.

How to prepare an epoxy resin to fill the tabletops: Follow the instructions

Both components must be mixed for the preparation of the composition. It is very important to keep the proportions recommended by the manufacturer and all carefully mix to resin has the right consistency. It should calculate in advance how much resin is required.

Tip! When using a special stirrer for solution preparation work at low speeds to prevent saturation of the resin with air bubbles.

Choosing a suitable epoxy resin to fill the countertops, look for ArtLine Crystal +:

To fill an epoxy resin worktop: features of the process

If the thickness of the formed layer of less than 5 cm, the composition can be filled at one time. For thinner products require the formation of two layers. The second should be poured in 1-2 days after the pouring of the first but before the first layer fully cured. In order to exclude the formation of voids in the corners of the future product, it should be prepared in advance moisten solution.

Attention! To form the trickle can use a thin rod, which is lowered into the mold during resin casting.

Remove all the bubbles rise to the surface. Cover the finished countertop to prevent accidental penetration of foreign objects. We expect to complete drying of the composition.

We offer watch a video, which shows you how to pour epoxy resin countertop:

How to conduct a finish polishing surface: tips

Finishing should expose all surface countertops. Do not use rough nazhdachku, because then it will be difficult to polish the surface. Work should be at low speed to prevent overheating countertops.

Tip! In the treatment zone during polishing blow off some water in order to ensure timely removal of heat and prevent clogging circles.

I think you might be interested in the video, describing the process of manufacturing the table of an epoxy resin with their hands:

Useful tips for working with epoxy resin and Safety

When producing tables made of wood and epoxy resin should be remembered that:

• in a humid environment the composition solidifies poorly. Significantly increases the probability of formation of bubbles on the surface;
• increase the rate of polymerization can be achieved by increasing the air temperature in the room. Direct heating is not recommended: coating formed may turn yellow.

Attention! Epoxy resin is toxic, so fill composition should be carried out in a well-ventilated area.

For your own security, you should also:

• perform the fill composition in the special clothing and gloves;
• finished surface during grinding work performed in safety glasses and respirators;
• in contact with drops of composition on the skin should immediately remove them with soap and water or denatured alcohol.

How to look at the table of an epoxy resin: tips

To top made of epoxy as long as possible keeps its appearance and strength properties, it is necessary to care for her properly. For maintenance, it is desirable to use a dry, soft cloth. Preferably wool and flannel. Strong contamination can be removed with a damp cloth and then the surface should be carefully wiped dry. The remaining droplets of water can trigger the appearance of spots.

Attention! Use of compositions containing alcohol or acetone, is unacceptable.

Avoid fall of heavy objects on the table surface of the water glass. Hot cups and plates is better to put on a special stand.

Comment

Irina Rosenstein

Designer studio "Cozy Home"

Ask a Question

«When choosing a place to install, prefer shaded area. The sun's rays will have a negative impact on the surface. "

How many tables are based on wood or other materials, and epoxy resin - a review of prices

Most often, these products are made to order. Price tables of wood and epoxy resin depends on the design and design features. On some models the price starts from 160 000-195 000 and above. The easiest coffee table Timb epoxy resin will cost 10,100 rubles. It has a length of 1 m and a width of 70 cm.

Consumer reviews of the epoxy resin tables

If you decide to buy or make a table of the epoxy resin, but doubts about whether to do it, read the review of who already have such furniture. Perhaps it will help you make the right decision:

Share in the comments that you have chosen: to buy a countertop made of epoxy resin or make it yourself, and why.