Vase from a plastic bottle with your own hands

click fraud protection
Contents:
  • Option 1
  • Option 2
  • Option 3
  • Option 4
  • Variant 5

For the manufacture of vases under the flowers are used a variety of materials - ceramics, porcelain, glass. But in order to get such an object with the original decor does not necessarily have to be a supermaster. A vase from a plastic bottle with your own hands is entirely within the power of everyone. How, using junk material, to create a truly beautiful thing that will make the interior truly unique and original, we will tell in this article.

to the contents ↑

Option 1

Such an article will become a wonderful gift. This is not surprising - things made with their own hands were always appreciated.

So, prepare for work:

  • Plastic vessel of the form you like.
  • Adhesive, which is used for ceiling coverings.
  • The twist of a paper twine.
  • Scissors.
  • Several beads for decoration.

The procedure is as follows:

  • Lubricate the top of the bottle with glue.
  • Gently glue the twine to the top of the neck. Then, turning the vessel, wind it on the neck( and, of course, it sticks).
  • Continue, gradually lubricating the plastic surface with glue, wrap it with string.

Important! Be sure to make sure that the coils fit tightly against each other so that the twine does not look through the gaps.

  • To decorate the top section of the product, cut a small piece of twine and unfold it. Glue the unfolded twine to the top of the bottle neck.
  • After the glue dries, make the decor. Fold the pieces of rope with circles and glue them to the finished vase in random order. To decorate the bottom, thickened, part of the flower pot, you can make circles with a larger diameter.

Important! It will turn out very nicely, if you lay out "flowers" from the circles.

  • Now it remains only to paste the beads in the middle of the "flowers".

Handmade "handmade" ready!

to the contents ↑

Option 2

This is an even simpler version of a vase from a plastic bottle with your own hands. In addition to the plastic container, you will need:

  • Marker.
  • Stationery knife.

The algorithm for manufacturing the pot is as follows:

  • Take a plastic bottle( it must be clean and dry), mark the height of the product on it.

Important! Since the top part of the vase will be woven, make a mark 70-80 mm above the desired height.

  • Cut the top of the vessel with a stationery knife.
  • Carefully cut the top of the product to a depth of 80 mm.
  • Fold the strips outward so that the fold is even. To do this, press the bottle with a fold to a flat surface.
  • Weave the top part of the craft. Take one strip, bend it to the left and draw under two adjacent ones.
  • Fold the next strip to the left. Having passed 2 adjacent bands, start it under the third.
  • Continue until you have braided all the strips.

The pot is ready! If everything is done carefully, it will turn out to be beautiful and original.

Important! You can paint it with an acrylic dye or a toning spray from a can.

to the contents ↑

Option 3

Prepare the following items for work:

  • Plastic vessel for 2.0 liters. Beans, beans or peas.
  • Knife stationery.
  • Marker.
  • Ruler.
  • Paint in can.
  • Hot-melt gun.

Here is the master class "vase from a plastic bottle with your own hands":

  1. Measure out the desired height of the craft, cut the top exactly according to the mark.
  2. Using the marker, draw vertical equidistant stripes from the top to the bottom of the product.
  3. Apply a hot-melt gun, glue the grain on the marked lines.
  4. Paint the vase with spray paint and leave to dry.
to the contents ↑

Option 4

In this case, a vase from a plastic bottle will be made by hand using the papier-mache technology

So, you will need:

  • Plastic bottle - washed and dried.
  • Sheets of colored paper.
  • Scissors.
  • Stationery knife.
  • Pencil glue.
  • Marker.

Now follow the same algorithm:

  1. Mark the desired height of the vase with the marker. Cut off the neck of the vessel.
  2. Pick up the colored paper in small pieces, cover them with the inner surface. Continue to paste the paper until the plastic is completely closed.
  3. Use a napkin to wipe off any excess glue, trying to smooth the surface with your finger.
  4. In the same way, glue a paper of contrasting shade from the outside of the vase.
  5. After the paper is pasted, gently trim the excess along the cutting line.

Important! You can open the surface with varnish, so that the object lasts longer and is suitable for freshly cut flowers.

to the contents ↑

Option 5

You can make 2 flower vases at once from your own hand from improvised materials.

So, you will need:

  • Washed and dry plastic bottles.
  • Scissors.
  • Adhesive or adhesive tape.
  • Knife stationery.

The procedure will be as follows:

  1. Cut the neck of the vessels.
  2. Using a clerical knife, cut the plastic into petals, bend them outwards, and then fix with adhesive or adhesive tape.
  3. At the bottom, make holes for water drainage.
  4. Color the vases with acrylic paints.

If you try, you can make a vase that will look like a real work of art. Time will not need much, but enjoying the creative process - over the edge! Vases with their own hands out of improvised materials will decorate your apartment or cottage.