How to wipe the corrector from the skin?

The office corrector is the most convenient thing among all the working tools of every person in the office. They can cover up all the shortcomings and mistakes that are allowed. However, at the most inopportune moment you can get dirty yourself. In fact, every person faced such a problem that his hand or clothes were smeared into putty. It is not so easy to remove such spots. Today we'll talk about how to wipe the proof-reader from the skin, from the table, clothes and other items.

to contents ↑

Features of office putty

If you get dirty in a coating fluid and do not know how to remove it, you do not need to think that this blob will remain on things or a table for the whole time. There are several tips and ways to remove putty from the skin or clothes simply.

At the initial stage, you need to determine which main substance is part of the corrector. It can be alcohol, emulsion, water or a dry base.

Important! Often, the composition is written on a jar with corrective fluid and in English. If you do not speak a foreign language perfectly, equip yourself with an interpreter, and he will help to cope with this problem.

The composition of the coating liquid depends on how to solve the dilemma, how to wipe the putty from the table or other object.

to content ↑

Water putty - cleaning is simpler than simple

The simplest solution to the problem than wiping the corrector from the skin or from furniture is to remove traces of the liquid that was made on a water basis. In this case, you need to use ordinary soap and water:

• It is enough to wash your hands, a little rubbing the blot from the dry putty putty, and you will forget about this shortcoming forever.
• To clean the countertop, wipe the trail with a cloth dampened with soapy water. Wipe dry from above.

to the contents ↑

We remove the corrector on an alcohol basis

Whether you have formed blots from a corrective fluid that is made on an emulsion or alcohol basis, you will have to work hard to wipe the putty from the table or skin.

However, in any case, following our advice and recommendations, you will be able to cope with this problem:

1. If you saw that you have put a putty on the table top or the skin, there is no need to wipe it instantly, as you will only smear white dirt all oversurface, without eliminating it.
2. Wait a moment for the blob to dry, and then with alcohol, make-up removal tonic or acetone, you can remove this stain.
3. After removing the blots, you should carefully wash the place where there was a white blot with a soap solution and rinse with water.

Important! At the decision, than to wash the proof-reader, the methylated or ammonia spirit is the best.

To wipe the putty from the table, the very important point is what material is made of the piece of furniture:

• If the surface of the countertop is veneered, then with the corrective fluid, white spirit is best used.
• For the laminated chipboard surface, 646 solvent is best suited.

Important! Please note that if you have covered the surface of furniture with a white liquid, which is made of stained wood, eliminating the blot, you can damage the top layer. That's why you must first try to wipe the spot with white spot on the invisible side of the table, and only then try from the front surface.

to the contents ↑

We clean the surfaces from the corrector in the form of a tape

If you use a tape-corrector and accidentally stained furniture or leather, it will not be a problem to remove this blot. Do not think long over how to wipe the putty off the table. The putty in the form of a tape perfectly wipes off if it is exposed to moisture:

1. Put a wet cloth on the blot.
2. Literally in 10-15 minutes you can easily solve this problem without difficulties.

Important! If there is no liquid near you, you can gently wipe the white blob with a blade or eraser. Do it very carefully, so as not to scratch the surface.

to content ↑

Removing traces on fabric

Removing stains on fabric things, as well as on furniture and hands, depends on the basis on which the masking agent was made:

• If on water, just wash this itemin a washing machine or with hands.
• If a white substance is manufactured on an alcohol, emulsion or some other basis, special stain removal agents should be used. In stores there is a huge selection of such substances. However, we strongly recommend that you try to remove the blob on an invisible piece of clothing, and then wash the entire product.

Important! From improvised means for removing white matter, you may need white spirit, acetone, nail polish remover, kerosene or gasoline.

In order to solve the problem, than to wipe the putty from the skin or clothes, it is worth leaving a cotton swab that has been soaked in a solvent for half an hour. After that, you can easily wipe off the blot, forgive the thing and forget about this shortcoming forever.

Important! If, when removing the stain, you are faced with the fact that after the first procedure the blob has slightly gone, it is worthwhile to perform this action several times.

To remove old stains of soaking liquid from clothes, it is better to turn to dry cleaning. In this establishment, professionals will be able to cope with this problem on their own. Listening to our recommendations, you will manage to cope with the problem and correctly decide what to erase the corrector from the skin or the table.